A place to discuss and share pictures, reviews, of your rifles.
-
zunmik
- Pistoleer
- Posts:741
- Joined:Sat Nov 10, 2012 6:22 pm
Melbourne bell target club
Post
by zunmik » Fri Dec 21, 2012 12:59 pm
I attended for the first time last night i had a great time, loads of "classic"
guns there Plus a sprinkling of quality modern guns, @ Melbourne they shoot both pistol & rifle also Bell & paper targets all @ 6 yds. Its a friendly relaxed atmosphere so i look forward to returning in January. One of the guns i got to shoot was a BSA light pattern which was still more accurate than me as the owner consistently rang the bell with it (impressive), M.
WALTHER LP3],Etc[/b], G0JVB ex G6MUI.
-
pmh
- Site Admin
- Posts:1826
- Joined:Sat Nov 10, 2012 5:07 pm
Post
by pmh » Fri Dec 21, 2012 3:11 pm
Bell target pistol sounds quite good, as I am not sure I have enough room for another rifle.
Kind regards,
Phil
-
Tank
- Pistoleer
- Posts:505
- Joined:Sat Jan 05, 2013 7:08 pm
Post
by Tank » Mon Feb 04, 2013 10:51 pm
Just been reading through the rules and all good. Just one question, I know the hole in the centreplate is 3/8 or 9mm is acceptable by some but what is the centre to centre distance of the rings?
I have read somewhere an inch, but those lines are not an inch.
All help gratefully received.
graham.
I’m going off to go find myself. If I’m not back by the time I return, keep me here.
https://tamesidepistol.club/
-
pmh
- Site Admin
- Posts:1826
- Joined:Sat Nov 10, 2012 5:07 pm
Post
by pmh » Tue Feb 05, 2013 7:04 pm
I intend to draw a printable practice version soon, and first thought it was diameter:- 1", 2", etc. However, I suspect it might be radius.
Kind regards,
Phil
-
Tank
- Pistoleer
- Posts:505
- Joined:Sat Jan 05, 2013 7:08 pm
Post
by Tank » Tue Feb 05, 2013 7:52 pm
Well my solution is to bring my ruler on Thursday and measure the one's at the club!
The targets of course!
graham.
I’m going off to go find myself. If I’m not back by the time I return, keep me here.
https://tamesidepistol.club/
-
bellringer
- Marksman
- Posts:109
- Joined:Mon May 13, 2013 8:40 pm
Post
by bellringer » Mon May 13, 2013 10:15 pm
Hi, new member to the forum, so this may already be obsolete info; but Feinwerkbau produced a 300 ''Junior'' variation which one of my clubmates is currently using. Slightly smaller all round than a 300S but just as good. He has mentioned that he may be ready for a change of gun so let me know if there is any interest and I will ask the question.
