please help.............

A place to discuss all things Webley. As this is probably the most collected airgun maker we felt it deserved a section of its own.
Post Reply
User avatar
wmp50075
Plinker
Plinker
Posts:76
Joined:Sun Jan 06, 2013 7:33 pm
please help.............

Post by wmp50075 » Mon Jan 13, 2014 7:17 pm

hello fellow webley fans,
i recently acquired a webley straight grip mk.I and I am trying to find a replacement sight blade for it. as you can see from the attached pics, the one which was on it has been a little ‘butchered’ over the years. the condition of a replacement is not that important as long as it has not been filed or cut down.
thanking you in advance for any help you can offer.
andyL
IMG_4022.JPG
Attachments
IMG_4023.JPG

User avatar
pmh
Site Admin
Posts:1826
Joined:Sat Nov 10, 2012 5:07 pm

Re: please help.............

Post by pmh » Mon Jan 13, 2014 9:20 pm

This should be relatively simple to make.

I'll have a chat with Graham.

Kind regards,



Phil
M0KPH
I now have so many airguns I've had to make a list, which is >>HERE<<
>>North Manchester Target Club<<

User avatar
wmp50075
Plinker
Plinker
Posts:76
Joined:Sun Jan 06, 2013 7:33 pm

Re: please help.............

Post by wmp50075 » Mon Jan 13, 2014 10:05 pm

thanks phil. ideally i would like to track down a used original, but........................

User avatar
pmh
Site Admin
Posts:1826
Joined:Sat Nov 10, 2012 5:07 pm

Re: please help.............

Post by pmh » Tue Jan 14, 2014 11:31 am

You are like me.

However, in the event of a replacement original not being available, I have fitted a copy part and kept the original to pass on with the gun should I ever so it.

Kind regards,



Phil
M0KPH
I now have so many airguns I've had to make a list, which is >>HERE<<
>>North Manchester Target Club<<

User avatar
wmp50075
Plinker
Plinker
Posts:76
Joined:Sun Jan 06, 2013 7:33 pm

Re: please help.............

Post by wmp50075 » Tue Jan 14, 2014 6:54 pm

phil, you are a gent. i would appreciate any help you and graham can offer.
most respectfully,
andyL

User avatar
pmh
Site Admin
Posts:1826
Joined:Sat Nov 10, 2012 5:07 pm

Re: please help.............

Post by pmh » Tue Jan 14, 2014 8:36 pm

If you get a moment could you jot down some dimensions?

Kind regards,



Phil
M0KPH
I now have so many airguns I've had to make a list, which is >>HERE<<
>>North Manchester Target Club<<

bellringer
Marksman
Marksman
Posts:109
Joined:Mon May 13, 2013 8:40 pm

Re: please help.............

Post by bellringer » Sat Jan 18, 2014 10:37 pm

Hi, from bellringer. I have a new Mk I rear sight blade which has some surface rust due to not being stored properly at some point,but it has not been used. PM me with an offer [inc post]; not too sure what it's worth but will consider whatever you offer. Hope this helps. bellringer

User avatar
wmp50075
Plinker
Plinker
Posts:76
Joined:Sun Jan 06, 2013 7:33 pm

Re: please help.............

Post by wmp50075 » Sun Jan 19, 2014 12:58 pm

hi bellringer, PM sent.

Post Reply