RWS Meisterkugeln - Some Variations

A place to discuss and share pictures, reviews, of collectable pellets and tins.
Post Reply
User avatar
pmh
Site Admin
Posts:1826
Joined:Sat Nov 10, 2012 5:07 pm
RWS Meisterkugeln - Some Variations

Post by pmh » Sat Feb 09, 2013 4:32 pm

In the case with my Original Model 10, there was a tin of Meisterkuglen, which is obviously quite old.

As the receipt with the gun is from 1983, I would say that these date from around then at least.

Image

Along with the tins of 500, plastic boxes of 100 were also available. A recent post on the ABBS pointed to an advert on eBay, where there were some of these for sale.

Image

Unlike the 100 boxes today, which usually have a polystyrene lining, this has a stamped thin plastic sheet to hold the pellets.

Image

The two older versions shown next to the latest.

Image

Kind regards,



Phil
M0KPH
I now have so many airguns I've had to make a list, which is >>HERE<<
>>North Manchester Target Club<<

User avatar
zunmik
Pistoleer
Pistoleer
Posts:741
Joined:Sat Nov 10, 2012 6:22 pm

Re: RWS Meisterkugeln - Some Variations

Post by zunmik » Thu Aug 15, 2013 7:03 pm

Going through my pellets stock today I found 3 tins of these, but one tin is labelled 4.48. I did not know they did them in this size I've had 4.49 0r 4.5 before, but was not aware I had any 4.48 ??. M. :?
WALTHER LP3],Etc[/b], G0JVB ex G6MUI.

User avatar
pmh
Site Admin
Posts:1826
Joined:Sat Nov 10, 2012 5:07 pm

Re: RWS Meisterkugeln - Some Variations

Post by pmh » Thu Aug 15, 2013 10:51 pm

Interesting size. I don't recall seeing a 4.48mm version of any pellet before either.

Kind regards,



Phil
M0KPH
I now have so many airguns I've had to make a list, which is >>HERE<<
>>North Manchester Target Club<<

zooma
Lifetime Contributor to Shooting
Lifetime Contributor to Shooting
Posts:646
Joined:Sat Nov 10, 2012 9:12 pm

Re: RWS Meisterkugeln - Some Variations

Post by zooma » Tue Nov 05, 2013 4:06 pm

The RWS Meisterkugeln and the RWS R10 pellets are available in 4.48, 4.49. 4.50 and 4.51.

............no entirely sure why but we can buy them in any of these sizes to order ( minimum quantity is one sleeve of 10 tins).
Feinwerkbau P40 Tricolour wanted.........still !
http://www.bobsairguns .com - proud to host the RMTC site since April 2011.

Post Reply