feinwerkbau 100

A place to discuss and share pictures, reviews, of your pistols.
Posts: 2
Joined: Mon Apr 08, 2019 5:41 pm

Re: feinwerkbau 100

Post by Azmodan » Thu Apr 11, 2019 8:13 pm

Mattdale wrote:
I had a similar issue with my 100 when I first got it.
best to strip it down and clean out all the 30 year old grease which can gum up the mechanism.
Also good idea to fit new seals:

https://rover.ebay.com/rover/0/0/0?mpre ... 3092137404" onclick="window.open(this.href);return false;

I used this strip guide, really easy to do :

http://www.airgunbbs.com/showthread.php ... -Model-100" onclick="window.open(this.href);return false;

Very satisfying to have it all as it would have been new, they’re not cheap so worth the effort.



thank you
i ordered a seal set. hope it will fix the problem.

Posts: 30
Joined: Sun Sep 03, 2017 8:10 am

Re: feinwerkbau 100

Post by Mattdale » Thu Apr 11, 2019 11:01 pm

I seem to remember I had an issue with a seized bolt or something when I stripped mine.
I just left the pistol on a radiator for a few hours to warm up and the expansion of the aluminium unseized the bolt. Glad I didn’t try to force it. Other than that very straight forward.

Let us know how you get on.


User avatar
Posts: 475
Joined: Sat Jan 05, 2013 7:08 pm

Re: feinwerkbau 100

Post by Tank » Wed Apr 24, 2019 8:08 am

Patience is the magic ingredient with these things, as Matt says, leaving things to soak to loosen up is the way forward. A good clean and re-lube is always beneficial.
I’m going off to go find myself. If I’m not back by the time I return, keep me here.

Post Reply