feinwerkbau 100

A place to discuss and share pictures, reviews, of your pistols.
Azmodan
Posts:5
Joined:Mon Apr 08, 2019 5:41 pm
Re: feinwerkbau 100

Post by Azmodan » Thu Apr 11, 2019 8:13 pm

Mattdale wrote:
Hi,
I had a similar issue with my 100 when I first got it.
best to strip it down and clean out all the 30 year old grease which can gum up the mechanism.
Also good idea to fit new seals:

https://rover.ebay.com/rover/0/0/0?mpre ... 3092137404" onclick="window.open(this.href);return false;

I used this strip guide, really easy to do :

http://www.airgunbbs.com/showthread.php ... -Model-100" onclick="window.open(this.href);return false;

Very satisfying to have it all as it would have been new, they’re not cheap so worth the effort.

Enjoy!

Cheers,
Matt.

thank you
i ordered a seal set. hope it will fix the problem.

Mattdale
Posts:33
Joined:Sun Sep 03, 2017 8:10 am
Been thanked: 2 times

Re: feinwerkbau 100

Post by Mattdale » Thu Apr 11, 2019 11:01 pm

I seem to remember I had an issue with a seized bolt or something when I stripped mine.
I just left the pistol on a radiator for a few hours to warm up and the expansion of the aluminium unseized the bolt. Glad I didn’t try to force it. Other than that very straight forward.

Let us know how you get on.

Matt.

User avatar
Tank
Pistoleer
Pistoleer
Posts:505
Joined:Sat Jan 05, 2013 7:08 pm

Re: feinwerkbau 100

Post by Tank » Wed Apr 24, 2019 8:08 am

Patience is the magic ingredient with these things, as Matt says, leaving things to soak to loosen up is the way forward. A good clean and re-lube is always beneficial.
graham.
I’m going off to go find myself. If I’m not back by the time I return, keep me here.
https://tamesidepistol.club/

Azmodan
Posts:5
Joined:Mon Apr 08, 2019 5:41 pm

Re: feinwerkbau 100

Post by Azmodan » Fri Apr 26, 2019 2:22 pm

replaced the valve seal (1750.214.1 and 1750.215.1) and now it works ok.
had a bit of trouble removing the old seal and, at the end, putting the front sight cap back on (i could fit it by hand - had to push it in using the screw).

other than that.. all went fine.

User avatar
Tank
Pistoleer
Pistoleer
Posts:505
Joined:Sat Jan 05, 2013 7:08 pm

Re: feinwerkbau 100

Post by Tank » Sat Apr 27, 2019 8:19 am

All Feinwerkbau's are quality guns. I have a 300S that shoots beautifully and would be the last gun I would sell.
graham.
I’m going off to go find myself. If I’m not back by the time I return, keep me here.
https://tamesidepistol.club/

User avatar
zunmik
Pistoleer
Pistoleer
Posts:739
Joined:Sat Nov 10, 2012 6:22 pm

Re: feinwerkbau 100

Post by zunmik » Sat Apr 27, 2019 11:03 am

Fully concur with the comment that all Fwb are superb, whilst shooting i always wanted, but never found the rare RB version though i was rubbish @ running boar with my 300. mike.
WALTHER LP3],Etc[/b], G0JVB ex G6MUI.

Azmodan
Posts:5
Joined:Mon Apr 08, 2019 5:41 pm

Re: feinwerkbau 100

Post by Azmodan » Thu May 23, 2019 5:39 am

a presentation video for fwb100:

Cankiller
Posts:26
Joined:Sun Dec 16, 2018 11:58 pm

Re: feinwerkbau 100

Post by Cankiller » Fri May 24, 2019 7:26 pm

Thanks for the vid. I'm now the proud owner of a 102 and a 103. Cool stuff . So well made.
Webleys x5...BSA x3...BSF x2...Diana x 10...Weirauch x6...Crosman/Franklin x7...Gamo x5...Chiappas x1...Hatsan x1...
Browning x2...Feinwerkbau x1...Baikel x3...Cometa x2...FB Record x2...Hyscore x2...Westlake x1...etc...etc...

Azmodan
Posts:5
Joined:Mon Apr 08, 2019 5:41 pm

Re: feinwerkbau 100

Post by Azmodan » Sat Jun 01, 2019 8:13 am

made a short instruction video on how to replace the valve O-ring:

Post Reply